Valley International Journal Digital Library

VIJ Digital library
Articles

Sustainable Manufacturing Engineering: Enhancing Product Quality through Green Process Innovations

PDF
  • Harshitkumar Ghelani
Harshitkumar Ghelani
Gujrat Technological University
Published in : International Journal of Scientific Research and Management (IJSRM) , Vol. 11 No. 08 (2022)

Submission to VIJ 2022-08-28

Abstract

The imperative for sustainable practices within manufacturing has become increasingly critical, driven by environmental concerns, regulatory pressures, and the evolving expectations of eco-conscious consumers. This paper investigates the role of sustainable manufacturing engineering in enhancing product quality through the implementation of green process innovations. Specifically, the study explores how sustainable manufacturing methods, including energy-efficient systems, additive manufacturing, zero-waste production, and renewable energy integration, can drive quality improvements while reducing the environmental impact of production processes.

The research is grounded in a comprehensive analysis of current green innovations in the manufacturing sector, drawing on case studies of companies that have successfully balanced quality and sustainability. The findings indicate that companies adopting sustainable practices not only reduce waste and lower emissions but also experience notable gains in product durability, customer satisfaction, and brand reputation. For instance, additive manufacturing is shown to improve precision and material efficiency, while zero-waste initiatives lead to a more efficient resource cycle, which in turn supports consistent quality standards.

This paper further delves into the challenges of implementing green manufacturing processes without compromising product quality, examining factors such as initial costs, technological readiness, and market adaptation. Visual data in the form of tables and graphs are presented to compare different green process innovations and their respective impacts on quality and sustainability metrics. In addition, case study summaries provide real-world examples of how leading companies have enhanced product quality through sustainable engineering approaches.

This study underscores the value of sustainable manufacturing engineering as a dual-benefit strategy that can drive environmental stewardship alongside quality enhancement. The paper recommends that future research focus on the development of new, cost-effective green technologies and the application of advanced data analytics for improved process control in sustainable manufacturing. Through these efforts, the manufacturing sector can continue advancing toward a more sustainable, high-quality production paradigm.

PDF

References

  1. Sharma, K., Arora, R., Nangia, R., Singel, R., & Dixit, S. (2022). Effects of green manufacturing and technological innovations on sustainable development. Materials Today: Proceedings, 69, 266-270.
  2. Albloushi, B., Alharmoodi, A., Jabeen, F., Mehmood, K., & Farouk, S. (2023). Total quality management practices and corporate sustainable development in manufacturing companies: the mediating role of green innovation. Management Research Review, 46(1), 20-45.
  3. Rusinko, C. (2007). Green manufacturing: an evaluation of environmentally sustainable manufacturing practices and their impact on competitive outcomes. IEEE transactions on engineering management, 54(3), 445-454
  4. Begum, S., Xia, E., Ali, F., Awan, U., & Ashfaq, M. (2022). Achieving green product and process innovation through green leadership and creative engagement in manufacturing. Journal of Manufacturing Technology Management, 33(4), 656-674.
  5. Shahzad, M., Qu, Y., Rehman, S. U., & Zafar, A. U. (2022). Adoption of green innovation technology to accelerate sustainable development among manufacturing industry. Journal of Innovation & Knowledge, 7(4), 100231.
  6. Sezen, B., & Cankaya, S. Y. (2013). Effects of green manufacturing and eco-innovation on sustainability performance. Procedia-Social and Behavioral Sciences, 99, 154-163.
  7. Cherrafi, A., Garza-Reyes, J. A., Kumar, V., Mishra, N., Ghobadian, A., & Elfezazi, S. (2018). Lean, green practices and process innovation: A model for green supply chain performance. International Journal of Production Economics, 206, 79-92.
  8. Maziriri, E. T., & Maramura, T. C. (2022). Green innovation in SMEs: the impact of green product and process innovation on achieving sustainable competitive advantage and improved business performance. Academy of Entrepreneurship Journal, 28(1), 1-14.
  9. Jayal, A. D., Badurdeen, F., Dillon Jr, O. W., & Jawahir, I. S. (2010). Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels. CIRP Journal of Manufacturing Science and Technology, 2(3), 144-152.
  10. Haapala, K. R., Zhao, F., Camelio, J., Sutherland, J. W., Skerlos, S. J., Dornfeld, D. A., ... & Rickli, J. L. (2013). A review of engineering research in sustainable manufacturing. Journal of manufacturing science and engineering, 135(4), 041013.
  11. Jawahir, I. S., Wanigarathne, P. C., & Wang, X. (2006). Product design and manufacturing processes for sustainability. Chapter 12 Mechanical Engineers’ Handbook, 414-443.
  12. Khabibullaev, T. (2024). Navigating the Ethical, Organizational, and Societal Impacts of Generative AI: Balancing Innovation with Responsibility. Zenodo. https://doi.org/10.5281/zenodo.13995243
  13. Florida, R. (1996). Lean and green: the move to environmentally conscious manufacturing. California management review, 39(1), 80-105.
  14. Goyal, A., Agrawal, R., & Sharma, A. K. (2022). Green quality circle: Achieving sustainable manufacturing with low investment. Resources, Conservation & Recycling Advances, 15, 200103.
  15. JOSHI, D., SAYED, F., BERI, J., & PAL, R. (2021). An efficient supervised machine learning model approach for forecasting of renewable energy to tackle climate change. Int J Comp Sci Eng Inform Technol Res, 11, 25-32.
  16. Ghelani, H. (2024). AI-Driven Quality Control in PCB Manufacturing: Enhancing Production Efficiency and Precision. Valley International Journal Digital Library, 1549-1564.
  17. Joshi, D., Sayed, F., Saraf, A., Sutaria, A., & Karamchandani, S. (2021). Elements of Nature Optimized into Smart Energy Grids using Machine Learning. Design Engineering, 1886-1892.
  18. Ghelani, H. (2024). Advanced AI Technologies for Defect Prevention and Yield Optimization in PCB Manufacturing. Valley International Journal Digital Library, 26534-26550.
  19. Joshi, D., Parikh, A., Mangla, R., Sayed, F., & Karamchandani, S. H. (2021). AI Based Nose for Trace of Churn in Assessment of Captive Customers. Turkish Online Journal of Qualitative Inquiry, 12(6).
  20. Khambaty, A., Joshi, D., Sayed, F., Pinto, K., & Karamchandani, S. (2022, January). Delve into the Realms with 3D Forms: Visualization System Aid Design in an IOT-Driven World. In Proceedings of International Conference on Wireless Communication: ICWiCom 2021 (pp. 335-343). Singapore: Springer Nature Singapore.
  21. Mammadzada, A. Evolving Environmental Immigration Policies Through Technological Solutions: A Focused Analysis of Japan and Canada in the Context of COVID-19.
  22. Khambati, A. (2021). Innovative Smart Water Management System Using Artificial Intelligence. Turkish Journal of Computer and Mathematics Education (TURCOMAT), 12(3), 4726-4734.
  23. Priya, M. M., Makutam, V., Javid, S. M. A. M., & Safwan, M. AN OVERVIEW ON CLINICAL DATA MANAGEMENT AND ROLE OF PHARM. D IN CLINICAL DATA MANAGEMENT.
  24. Wu, D. (2024). The effects of data preprocessing on probability of default model fairness. arXiv preprint arXiv:2408.15452.
  25. Varagani, S., RS, M. S., Anuvidya, R., Kondru, S., Pandey, Y., Yadav, R., & Arvind, K. D. (2024). A comparative study on assessment of safety and efficacy of Diclofenac, Naproxen and Etoricoxib in reducing pain in osteoarthritis patients-An observational study. Int. J. Curr. Res. Med. Sci, 10(8), 31-38.
  26. Wu, D. (2024). Bitcoin ETF: Opportunities and risk. arXiv preprint arXiv:2409.00270.
  27. Viswakanth, M. (2018). WORLD JOURNAL OF PHARMACY AND PHARMACEUTICAL SCIENCES.
  28. Singh, J. (2022). Deepfakes: The Threat to Data Authenticity and Public Trust in the Age of AI-Driven Manipulation of Visual and Audio Content. Journal of AI-Assisted Scientific Discovery, 2(1), 428-467.
  29. Singh, J. (2022). The Ethics of Data Ownership in Autonomous Driving: Navigating Legal, Privacy, and Decision-Making Challenges in a Fully Automated Transport System. Australian Journal of Machine Learning Research & Applications, 2(1), 324-366.
  30. Sharma, P., & Devgan, M. (2012). Virtual device context-Securing with scalability and cost reduction. IEEE Potentials, 31(6), 35-37.